How to Clean a Toilet the Right Way – 8 Tips to Follow

Maintaining a clean toilet is essential for one’s health, as it can harbor bacteria and viruses for multiple days. These microorganisms can wreak havoc on one’s health, causing infections and illnesses. This is why it is vital to clean the bathroom and toilet regularly with good-quality toilet cleaners. Here are a few tips and steps that one can follow to clean their toilet the right way with toilet cleaners:

1.

How to Clean a Toilet the Right Way – 8 Tips to Follow
Start with the toilet bowl
The first step in cleaning a toilet is to tackle the most obvious part—the bowl. Since the bowl is at the highest risk of harboring germs, it needs to be cleaned thoroughly. Now, cleaning the toilet bowl can be approached in either of the two ways.

First, one can use a liquid toilet cleaning product, like Harpic Toilet Cleaner or Cif Toilet Cleaner, along with a toilet brush. Pour the product along the rim of the toilet bowl so that it trickles down and covers the whole bowl. Let it sit for a few minutes, as recommended on the packaging. Then, scrub the bowl with a toilet brush and flush the toilet once done. This method is beneficial if the toilet bowl has stubborn stains that must be thoroughly scrubbed with strong products.

Or, if one has the habit of cleaning their toilet bowl every other day and doesn’t want to wear out their pipes with strong cleaning agents, they can go for the Splash Foam Toilet Bowl Cleaner. This product comes in powder form, which instantly turns into foam when it comes into contact with water. So, to clean the toilet bowl, simply pour some of this powder into it. It will expand and cover the whole bowl within a few seconds. Let it sit for at least 20 minutes before flushing the toilet.

2. Clean the rim
After the interior of the toilet is thoroughly cleaned, it is time to scrub the outer rim. This, too, has to be cleaned with a strong disinfectant as it gathers stains and grime. One can use liquid cleaning products like Harpic, Cif, or similar toilet cleaners for this. One can also use a foaming gel cleaner, like the Mr. Muscle Foaming Bleach Gel toilet cleaner. As the name suggests, this product contains bleach, which can whiten the surface and make it shine. But most importantly, these products kill most of the germs, which is vital to maintaining a hygienic toilet.

3. Clean the outer body and base of the toilet
The outside of the toilet bowl is often overlooked and, over time, gathers a lot of stains, which are extremely hard to remove. For this surface, one can also use foaming gel cleaners with bleach, like the Mr. Muscle Foaming Bleach Gel Cleaner. To use this:

  • Spray the foam gel on the exterior surface, especially the stained portions.
  • Let this foam sit for at least 10 minutes.
  • Wipe the area clean and wash it with water.

4. Clean the toilet seat
If one has a detachable toilet seat, remove it and keep it aside. Pour the cleaning products into the toilet bowl, and while the products are doing their job, one can get to cleaning the seat. For this, choosing a gentle cleaning product that does not have bleach is crucial. Since the seat comes into direct contact with the skin, cleaning it with bleach is not safe. So, one can use non-bleach cleaning products to clean and disinfect the seat. Apply the product to both sides of the seat and lid, and clean it thoroughly. The process is pretty much the same for non-detachable toilet seats. The only difference would be to clean the inside of the bowl and rim first before scrubbing the seats. Let the solution sit for a few minutes before cleaning it with a sponge. Clean the nooks and crevices with a used toothbrush at the back of the seat.

5. Mop the surrounding area
Finally, one must mop the area around the toilet properly. The area might have become slippery due to all the products and water, so one must be careful while mopping.

Safety tips to follow
The products used for cleaning toilets can contain harsh chemicals. Therefore, it is crucial to follow some safety tips, such as the following:

1. Wear rubber gloves
Before beginning any cleaning, one must remember to wear the required safety gear: rubber gloves. These gloves will protect one’s skin from coming into contact with cleaning products, which could contain harsh chemicals. If they do, it can cause a lot of skin irritation. Secondly, these gloves will also allow one to stay safe from germ-infected surfaces when cleaning them.

2. Ensure proper ventilation
The chemicals in most cleaning products are also not safe to breathe. So, it is crucial to ensure proper ventilation—like open windows and exhaust fans—in the bathroom during the cleaning process.

3. Avoid purchasing cheap products
When one buys cleaning products for the toilet and bathroom, one may discover many rip-offs and fake products available. For instance, one may also get recommendations for fake products when looking online for where to buy a Cif toilet cleaner. These might be especially unsafe to use. So, it is essential to purchase genuine cleaning products. One can also visit the brand’s website to buy the products, and they might just get a good deal like the Splash Foam Toilet Cleaner, which is available at a huge discounted price on the brand’s website.

Disclaimer:
The content provided on our blog site traverses numerous categories, offering readers valuable and practical information. Readers can use the editorial team’s research and data to gain more insights into their topics of interest. However, they are requested not to treat the articles as conclusive. The website team cannot be held responsible for differences in data or inaccuracies found across other platforms. Please also note that the site might also miss out on various schemes and offers available that the readers may find more beneficial than the ones we cover.
Previous Article
Next Article