Six vacuuming mistakes to avoid

Many people often end up damaging furniture when using vacuum cleaners. These damages can be a result of mistakes or misinformation. Either way, they can end up costing heavily either in repairs or replacement. These mistakes can be avoided if one knows the right way to use a vacuum cleaner. So, let’s discuss the common mistakes made when handling vacuum cleaners in order to save us all from future damage.

Six vacuuming mistakes to avoid

Using the wrong attachments

Vacuum cleaners come with a varied range of attachment heads to provide optimum service. However, it is up to the user to use the right attachment in the right place for the right task. Failure of this simple task means the machine might have to work harder to deliver the expected results. Additionally, the extra load on the motor may lead to early aging of the machine.

Using a dirty filter

Vacuum cleaners come with filters that trap minute particles of dust and dirt and prevent them from circling back into the air. However, if the filters are full, the microparticles will freely float into the air instead of staying trapped. It is crucial to check the manual for the type of filters installed in the machine. In the case of washable ones, you can simply hand wash the filters, dry them, and fit them back in. On the other hand, disposable filters need to be replaced every few months.

Not cleaning out the bags

When you use the vacuum cleaner with its dirt disposable bag full, it loses its efficiency of sucking up dirt and dust. You will have to go over the same area more than twice to ensure it is dust-free. Full bags decrease the machine’s suction capacity. If we empty out the bags regularly, it gives the machines the chance to function efficiently and smoothly for a longer period.

Vacuuming liquids

Using a vacuum cleaner to clean up puddles of water will lead to severe damage to the equipment and a high risk of electrocution. And if you manage to get through the act unscathed, emptying out the bin bag will be a real nightmare. If an all-in-one vacuum cleaner is on your list of home equipment, opt for a wet-dry cleaner and save yourself the hazards.

Not clearing out the hard objects

We often forgo clearing the grounds or couch corners when planning to get your vacuum cleaners out. You don’t even stop the mean machine when we spot a penny or two in its path. This lenient attitude can get us into trouble. Cleaning out hard objects like screws, coins, and/or stones can cause damage to the internal system or structure of the machine. It might not turn into a disaster every time you do it, but once is more than enough to break it down.

Using damaged cords
Most of us have done it. After a tiresome vacuuming session, you simply yank the power cord instead of properly pulling it out of the plug. The harsh yanks can cause damage to the cords and, in turn, pose a hazard to the functionality of the machine. Vacuum cleaners with damaged cords are dangerous to use and should be avoided.

Disclaimer:
The content provided on our blog site traverses numerous categories, offering readers valuable and practical information. Readers can use the editorial team’s research and data to gain more insights into their topics of interest. However, they are requested not to treat the articles as conclusive. The website team cannot be held responsible for differences in data or inaccuracies found across other platforms. Please also note that the site might also miss out on various schemes and offers available that the readers may find more beneficial than the ones we cover.
Previous Article
Next Article